Operation; Selecting A Location; Instructions For Use - Verilux HappyLight VT05 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Selecting a Location

• Place your Verilux
surface.
• For best performance, place the HappyLight as close as 6 inches, but within
24 inches from your face.
CAUTION :
sunlight or close to heat-radiating products such as heaters. Do not place the
lamp on the top of appliances that radiate heat.
WARNING:
Vents are necessary for proper function of the electronic ballast;
blocking them may cause overheating of the electronics and
increase risk of fire.

Instructions for Use

Use consists of sitting close to the HappyLight Energy Lamp with your eyes
open. While staying oriented toward the light, feel free to engage in other
activities such as reading, writing, hobbies and crafts, sewing, needlepoint,
applying make-up, painting or working at your computer or desk.
1. Turn on the lamp and allow a few
minutes for the bulb to achieve full
brightness.
2. The HappyLight Energy Lamp should
be positioned as close as 6 inches, but
within 24 inches from your face, and
should be slightly offset from center
(see diagram). Note: Do not look directly
into the lamp.
3. Recommend switching on high setting
for morning and low setting in the
afternoon.
The light from the HappyLight Energy
Lamp must be directed at your eyes;
therefore, your eyes must be open to achieve the full benefit. Note: Tinted
glasses reduce the amount of light reaching your eyes.
When you are feeling sluggish and lethargic, spend more time with the light, sit
closer to the light or add more lighting devices to increase the intensity. If you
experience edginess, or are over stimulated, move the light further away or
reduce usage time.

Operation

HappyLight
Energy Lamp on a table or other flat
®
®
Avoid placing this lamp in areas that are exposed to direct
DO NOT BLOCK VENTS
6

Publicité

Chapitres

Table des Matières
loading

Table des Matières