Publicité
Les langues disponibles
Les langues disponibles
Storing your own sound
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory (User 1, User 2, and User 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press EQ (equalizer).
2
Select the sound mode you want to
adjust.
Ex.: When you select "Country" previously
3
Enter the sound adjustment mode.
4
Make adjustments as you like.
Press ¢
1)
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
22
The next-step-operation
buttons start flashing.
The following sound
mode adjustment
screen appears on the
display.
or 4
to select the
Press 5 (up) or ∞ (down) to adjust the
2)
level of the selected band within the
range of –05 to +05.
3)
Repeat steps 1) and 2) to adjust the
other frequency bands.
5
Store the adjustment you made.
The confirmation message
appears—whether you want to
store the adjustment.
If you want to cancel the adjustments,
press EQ (equalizer).
6
Select one of the user sound modes
(User 1, User 2, or User 3) you want
to store into.
Ex.: When you select "User 1"
Publicité
