Publicité
Les langues disponibles
Les langues disponibles
Figure 9: Anchor Handles
in Unlocked Position
Note: Handles can be turned
inward or outward to unlock hitch.
8.
If not already installed, the Left hand and Right hand torsion springs will need to be added to the center section.
The coil must face the rear of the truck and wide hook must sit over the casting as shown in Figure 12. Tighten
1/4-20 X 1 1/2 bolt with 7/16 socket to 8 lb-ft.
Right Torsion Spring
1/4-20 X 1 1/2 bolt
Left Torsion Spring
30160N – 2OCT14
FOR KIT 30160
Figure 11: Pinning
Anchor Handles
Tube Spacer
Washer
REV. B
2014 CEQUENT™ PERFORMANCE PRODUCTS, INC
Figure 12: Torsion Spring Assembly
Figure 10: Anchor Handles
in Locked Position
Lynch pin
Front of Truck
PRINTED IN MEXICO
6
Publicité
