6. Suivez les instructions ci-dessous pour remplacer l'orifice.
a
Screw the LP orifice until orifice
protrudes 15/16" (23.8mm)
indicating full insertion (use
wrench to secure manifold when
re-attaching orifice).
7. Installez l'orifice de veilleuse LP en suivant les instructions ci-dessous.
(a) Utilisez une clé à fourche 7/16 "pour retirer le capot de la veilleuse.
(b) Retirez et jetez l'orifice de gaz naturel (GN). Placez l'orifice BP dans la veilleuse, puis replacez la hotte en serrant la
hotte jusqu'à ce qu'elle soit bien ajustée).
© Travis Industries
Installation
Slide the air shutters to provide access to the orifices.
9/16" Wrench
1/2" Wrench
Rear
Orifice
d
(for qualified installers only)
Use a 9/16" wrench to secure the
b
manifold while removing the orifice
with a 1/2" wrench.
Apply thread sealant to the LP orifice prior
to installation. Use the chart below to
identify the correct orifices.
15/16"
Look here for the orifice identification
23.8mm
6/1/2020 – 1425-FR
c
NG
LP
#31
#49
4415HO ST
53