Electrical Connections - Kichler 52" Terra Select Manuel D'instructions

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have turned off the
power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire
connecting nuts suppled with your fan. Secure the connectors with electrical
tape. Make sure there are no loose wire strands or connections.
Step 1. Connect the fan supply (black) wire and light supply (blue) wire to the
black household supply wire as shown in Figure 12.
Step 2. Connect the neutral fan (white) wire to the neutral household (white) wire.
Step 3. Connect the fan ground wire (green) to the household ground wire.
Step 4. After connecting the wires, spread them apart so that the green and white
wires are on one side of the outlet box and the black wires is on the other side.
Step 5. Turn the connecting nuts upward and push the wiring into the outlet box.
Power lines 120v
Green ground
Ground to
mounting bracket
or downrod
Fig. 12
52" Terra Select |
Wiring box
11