Electrical Connections - Kichler Chiara 52 Manuel D'utilisation

MAKE THE ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock, be sure you have turned o the power
at the main circuit panel before wiring. Follow the steps below to connect the fan to
your household wiring. Use the wire connecting nuts supplied with your fan. Secure
the connector with electrical tape. Make sure there are no loose wire stands or connections.
WARNING: If your house wires are di erent colors than referenced in this manual,
stop immediately. A professional electrician is recommended to determine proper wiring.
Step 1. Motor to Receiver Electrical Connections:
Connect the BLACK wire from the fan to BLACK wire marked "TO MOTOT L" from the
receiver.
Connect the WHITE wire from the fan to the WHITE wire marked "TO MOTOR N" from
the receiver.
Connect the BLUE wire from the fan to the BLUE wire marked "FOR LIGHT " from the
receiver.
Secure all the wire connections with the plastic wire connectors provided. ( Fig. 9)
Step 2. Remote Receiver to Outlet Box Electrical Connections:
Connect the BLACK (hot)wire from the ceiling to the BLACK wire marked "AC IN L"
from the receiver.
Connect the WHITE (Neutral ) wire from the ceiling to the WHITE wire marked " AC IN N"
from the receiver.
Step 3. Ground wires connections:
Connect the GROUND wire from outlet box to the GREEN wires from the fan and
mounting plate.(Fig. 9)
Secure the wire connections with the plastic wire connectors provided .(Fig. 9)
BLACK BLACK
BLACK
BLUE BLUE
WHITE
WHITE WHITE
GROUND GROUND
Fig. 9
52" Chiara LED 9