Warranty; Storage Conditions; 10 Ec Declaration Of Conformity - Mettler Toledo InPro 86X0ie Manuel D'instruction

InPro 86X0 i e
8

Warranty

On manufacturing defects, 12 months after delivery.
9 Storage conditions
Inspect the instrument immediately after receiving for any
transport damage. The sensor should be stored in a dry,
clean and protected area until the time of installation. If the
sensor has been removed from the process, it should be
thoroughly cleaned and dried. It should be stored in a dry,
clean and protected area until time of installation.
10 EC Declaration of Conformity
The complete declaration is available in the declaration of
conformity certificate.
© 06 / 2 021 METTLER TOLEDO Group, CH
en
21
InPro 86X0 i e
30 421 373 B