Nordcap MORETTI S Serie Mode D'emploi page 16

01 TECHNICAL DATA
02 INSTALLATION
03 OPERATION
04 ORDINARY MAINTENANCE
05 SPECIAL MAINTENANCE
06 LIST OF SPARE PARTS
Congratulations on the purchase of this exclusive Made in Italy device. You chose the equipment that combines the best technical qualities with maximum
ease of use. We wish you the greatest satisfaction.
Note:
This manual is printed in five different languages. Original instructions in Italian and translations of the original instructions in English, French, German
and Spanish.
For better clarity and reading this manual, it could be provided in several separate parts and can be sent by mail by contacting the Manufacturer.
Warranty only covers the replacement free to factory of pieces eventually broken or damaged because of faulty materials or manufacture.
Warranty does not cover any damages caused by third party transport or due to incorrect installation or maintenance, to carelessness or negligence
in usage, or to tampering by a third party.
Moreover, warranty does not cover: glass components, covers, bulbs, refractory surfaces and whatever depends on normal wear and deterioration
of both oven and accessories; nor does it cover labour costs involved in replacing pieces covered by warranty.
Warranty ends in case of non-compliance with payments and for any elements that may be repaired, modified or disassembled, even in part, without prior
written consent. For technical service during the warranty period, please send a written request to the local concessionary agent or directly to the Sales
Department.
WARNING
This word indicates a danger, and will be employed every time the safety of the operator might be involved.
NOTE
This word indicates the need for caution, and will be employed to call attention to operations of primary importance for correct and long-term operation of
the oven.
DEAR CUSTOMER
Before using the oven, please read this user manual.
Oven safety devices should always be maintained in a proper state of efficiency, to ensure the operator's safety .
This user manual intends to illustrate use and maintenance of the unit. For this reason, the operator is advised to follow the instructions given below.
1. The following instructions are provided for your safety.
2. Please read them carefully before installing and using the oven.
3. Keep this user manual in a safe place for future consultation by the operators.
4. Installation must be carried out in accordance with the Manufacturer's instructions by qualified and licensed staff.
5. This oven must only be employed for the purposes for which it was designed, that is to say to cook pizza and similar products. This appliance
is intended to be used for commercial applications, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises
such as bakeries, butcheries, etc., but not for continuous mass production of food. It is prohibited to bake products containg alcohol. Any
other use can be classed as improper.
6. The appliance is for institutional use only, and must only be operated by a qualified professional user who has been trained to use it. The
appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or who lack experience
or training. Children should be supervised to ensure they do not play with the appliance.
7. When carrying out repairs, always contact one of the Manufacturer's authorised service centres and request that original spare parts be used.
8. Failure to comply with the above may compromise the safety of the oven.
9. In the event of breakdown or malfunction always disconnect the oven, and do not attempt to make adjustments or repairs yourself.
10. Should the oven be sold or transferred to another owner, or should the current owner change his premises and wish to install the oven
elsewhere, always ensure that this manual remains with the oven, so that it can be consulted by the new owner and/or the person carrying out
installation.
11. In the interests of risk prevention, if the connection cable is damaged in any way, it must be replaced by a technical assistance service approved
by the manufacturer.
12. During installation, should there be any disturbance to equipment sharing the same power supply source, make sure that the impedence
Z = 0,08 Ω at the interface point and that the service current capacity is correctly sized for appliance emissions to conform to EN 61000-3-
MAX
11 and EN 61000-3-12 standards and subsequent modifications.
INDEX
WARRANTY
Standards and rules
WARNING!
UK/1
2
2
4
10
12
14