Icon Explanation; Important Safety Advice - Abus TVAC15000C Notice D'utilisation

Icon explanation

A flash in the triangle is used if there is danger for the health, e.g. by an electric shock.
This triangular with the exclamation mark warning symbol indicates important notes in
the operating instructions which should be observed.
This symbol indicates special information bulletins and notes on the operation of the unit.

Important safety advice

All warranty claims are invalid in the event of damage caused by operating the system in
non-compliance with this user guide. ABUS USA LLC cannot be held liable for resulting
damages.
In the event of material or personal damage caused by improper operation or non-
compliance with the safety information, we cannot be held liable. All warranty claims are
voided in such cases.
The device has been manufactured in compliance with international safety standards. Please read these
safety advices carefully.
Safety advice
1. Power supply
110 V AC voltage, 60 Hz (using a power supply unit for 5 V DC)
Operate this product only from the type of power supply indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult your local power company. Disconnect the product
from the mains before you start any maintenance or installation procedures. The power supplies are only
for indoor usage.
2. Overloading
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
3. Liquids
Protect the device from any kind of liquids entering.
4. Cleaning
Disconnect the product from the wall outlet before cleaning. Use a light damp cloth (no solvents) to dust
the product.
5. Accessories
Do not use any unsupported accessories as these may be hazardous or cause damage the product.
6. Location

This device can be used in inside as well as outside.

The product will be damaged even it falls from a low height.

During the installation of the camera please take care that direct sunlight cannot fall onto the
image sensor of the device. Please follow the installation instructions in the corresponding
chapter of this user manual.

Do not place the device near a radiator or heat register.

Only operate the device at locations where temperatures within the permitted ambient
temperature range of 14 °F to 122 °F prevail. Outside the predetermined temperature range
operation is possible, but can not be guaranteed.
5
English