Features & Controls; Proximity Controls - Zephyr Tidal II Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM

Proximity Controls

PROXIMITY SENSOR
When approaching the hood while it is powered off, the Power, Fan Decrease, Fan Increase,
and Light icons will illuminate, and "HELLO" will appear on the LCD display for 2 seconds.
If neither the fan nor lights are turned on within 60 seconds, the icons will turn off, and
"GOODBYE" will appear on the LCD display for 2 seconds.
The icons will not disappear until the fan and lights are turned off.
CONTROL ICONS
Power
Press the power icon to power on or off the fan and lights.
The hood has a memory function to remember the last used settings for the fan and lights.
After pressing the power icon to power off the hood, "GOODBYE" will appear on the LCD
display for 2 seconds.
The 3s icon under the power icon only illuminates when the fan is powered on. It is an
indicator to enable Automatic Delay Off by pressing and holding the power button
for 3 seconds.
Decrease Fan Speed
Press the icon to decrease fan speed from 6, 5, 4, 3, 2, 1, off.
Increase Fan Speed
Press the icon to increase fan speed from off, 1, 2, 3, 4, 5, 6.
Lights
Press the lights icon to change lighting level from 1, 2, 3, off.
Tidal II Use, Care, and Installation Guide
Power
Display & Icons
Adjust 6 Speed Levels
Features & Controls
Lights
21