Installation; Attaching And Aligning The Appliance - Gaggenau AW 2 Séries Notice D'utilisation Et De Montage

Installation

1 Screw on the fixing bracket for the flue duct.
2 Screw on brackets for the extractor hood hand-tight.
Do not firmly tighten the screws.
3 Screw in the threaded bolt, leaving it protruding out
of the wall by 5–9 mm.
¨
©
ª

Attaching and aligning the appliance

1 First, remove the protective foil from the back of the
appliance and, following installation, remove the foil
completely.
2 When attaching the appliance, ensure that it
engages firmly with the brackets.
3 Align the appliance horizontally by turning the
brackets. If required, the appliance can be moved to
¬
the right or left.
4 Firmly tighten the screws for the brackets. When
doing so, hold the brackets securely in place.
5 Firmly tighten the knurled nuts.
«
®
¯
25