General Safety Instructions - Husqvarna HA110 Manuel D'utilisation

• Carry the hedge trimmer by the handle with the
cutter blade stopped and taking care not to operate
Proper carrying of the hedge
any power switch.
trimmer will decrease the risk of inadvertent starting
and resultant personal injury from the blades.
• When transporting or storing the hedge trimmer,
always fit the blade cover.
hedge trimmer will decrease the risk of personal
injury from the blades.
• When clearing jammed material or servicing the unit,
make sure all power switches are off and the lock-off
is in the locked position.
hedge trimmer while clearing jammed material or
servicing may result in serious personal injury.
• Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring or its own cord.
"live" wire may make exposed metal parts of the
hedge trimmer "live" and could give the operator an
electric shock.
• Keep all power cords and cables away from cutting
Power cords or cables may be hidden in
area.
hedges or bushes and can be accidentally cut by the
blade.
• Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
This decreases the risk of being struck by
lightning.
lightning.
Safety instructions for extended reach
hedge trimmers
• To reduce the risk of electrocution, never use the
extended-reach hedge trimmer near any electrical
power lines. Contact with or use near power lines
may cause serious injury or electric shock resulting
in death.
• Always use two hands when operating the extended-
reach hedge trimmer. Hold the extended-reach
hedge trimmer with both hands to avoid loss of
control.
• Always use head protection when operating the
extended-reach hedge trimmer overhead. Falling
debris can result in serious personal injury.

General safety instructions

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
• Please read the operator's manual carefully and
make sure you understand the instructions before
using the attachment.
• These instructions supplement the instructions that
were included with the product. For other
procedures, please refer to the operating instructions
for the product.
820 - 003 - 07.02.2020
Proper handling of the
Unexpected actuation of the
Blades contacting a
• Under no circumstances may the design of the
attachment be modified without the permission of the
manufacturer. Do not use an attachment that
appears to have been modified by others and always
use original accessories. Non-authorized
modifications and/or accessories can result in
serious personal injury or the death of the operator
or others.
Save all warnings and instructions for
future reference
Safety instructions for operation
• If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop.
• Avoid all usage which you consider to be beyond
your capability.
• Cutting tool. Do not touch the tool without first,
switching off the engine/remove the battery.
• Never allow children to use the product.
• Ensure that no-one comes closer than 15 m while
you are working.
• Never allow anyone else to use the product without
first ensuring that they have understood the contents
of the operator's manual.
• Never work from a ladder, stool or any other raised
position that is not fully secured.
• Always ensure you have a safe and stable working
position.
• Always use both hands to hold the product. Hold the
product at the side of your body.
• Make sure that you connect the harness to the
support hook. Only use a single harness.
5