Elica ETB436SS Guide D'utilisation, D'entretien Et D'installation page 13

Air deflector installation (Recirculating accessories)
• Assemble the air deflector with the duct cover bracket with 4 assembly screws provided as shown.
• Measure from the bottom of the air deflector to the bottom of the hood outlet, as shown.
Cut the duct at the measured size.
• Uninstall the air deflector removing the 4 assembly screws.
• Slip the duct onto the bottom of the deflector.
• Place the assembled deflector and duct over the exhaust outlet from the hood.
• Assemble the air deflector with the duct cover bracket with 4 assembly screws provided as shown.
Telescopic duct cover Kit
• For telescopic duct cover installation refer to Installation Instructions section (option B - telescopic duct cover and
Mountig duct cover).
13