Warranty Conditions - GYS Ergo Lift 650 Manuel D'utilisation Et De Maintenance

The lift descends very
slowly without using the
remote control.
DEACTIVATION
Any machine that appears to be damaged in any way (broken, bent, cracked or damaged parts), that does
not function normally, or that is missing parts must be taken out of service immediately by removing the power
cord from the socket and then removing the fuse that is in the fuse holder at the hydraulic unit.
START-UP
The ERGO LIFT must be disposed of in accordance with the current environmental and disposal guidelines
of the country in which it is located.

WARRANTY CONDITIONS

The warranty covers any defect or manufacturing defect for 2 years from the date of purchase (parts and
labor). - The warranty does not cover incidents due to misuse, fall, disassembly or other damage due to
transportation. The warranty does not cover normal wear and tear of parts if maintenance is not kept up to
date. Only spare parts from the manufacturer may be used to repair the ERGO LIFT.
The limit load characteristics are indicated on the lift. The user must not remove, dirty or deface these labels.
The guarantee will be automatically terminated in case of falsification of this label. Contact the retailer or
manufacturer to get new ones if needed.
In the event of a malfunction, return the unit to your dealer, enclosing:
- A dated proof of purchase (receipt, invoice, etc.),
- A note explaining the malfunction,
- Copy of the "regular safety checks" if the product is more than one year old.
audible warning must be heard to
indicate that the lift is descending.
Both coils are activated
ERGO LIFT 650
Each solenoid valve is equipped with
manual activation in the event of a
power failure. Check that the red or
yellow screw of each solenoid valve is
in the down position (up position =
solenoid valve open in both directions /
down position = normal operation).
If the problem persists, contact your
after-sales service.
38