ASROCK K7Upgrade-600 Mode D'emploi page 12

FSB_SEL0
FSB_SEL1
FSB_SEL2
(see p.2, No. 13)
Note: The setting of the CPU front side bus frequency of this motherboard is by
means of the adjustment of jumper-setting. To perform over clocking, you must
set the FSB jumper according to your AMD CPU before you use the "Manual"
option as the FSB setting in BIOS setup. Please follow the figures above to set
the CPU front side bus frequency.
CPU Multiplier Jumper
(J1, 5 x 3-pin)
(see p.2, No. 3)
Note: The set of "CPU Multiplier Jumper" are designed to adjust the multiplier of CPU.
For detailed information, please refer to page 17 of user Manual in the Support
CD.
1 2 1 2 1 2 1 2 1 2
ASRock K7Upgrade-600 Motherboard