Installation and Operating Instructions
EN
ATTENTION
Touch Display Controller – KWL-BE Touch
A slight overpressure can be set for this ventilation profile to prevent smoke from
entering the apartment. This function does not replace an underpressure monito-
ring system!
The displayed profile is active/selected. In case of boost and fireplace ventilation, the ti-
mer function can be selected and edited by clicking.
Display/Button
Description
Menu no. X/Y
Change setting
Fault message
Warning
5
Function
Menu section number
Click on the timer function
and change the values in
the submenu, with + or -
Fault message is display-
ed. When clicked, the fault
message is displayed and it
can be reset.
Filter replacement is requi-
red, appears after the pre-
defined interval. When cli-
cked, the filter replacement
message is displayed and it
can be reset.
Fig.3