Scheppach HSC120 Traduction Des Instructions D'origine page 15

Explanation of the symbols on the equipment
The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the ex-
planations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks and
cannot replace correct actions for preventing accidents.
m Attention!
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Read through the entire text of the operating instructions before startup.
Wear safety glasses while working with the device.
Wear safety shoes while working with the device.
Wear work gloves while working with the device.
Set the cutting blade such that the cutting lever lies approx. 15° above the horizontal.
Do not remove any protective equipment.
Never reach into the moving parts of the block splitter.
During the work process, never press the cutting lever in the opposite direction.
Beware of flying pieces.
Always place the stone material in the centre of the device.
In this operating manual, we have used this sign to mark all sections that concern your
safety.
GB | 15