habitat et jardin USAIN Mode D'emploi page 17

Running Belt Adjustment
Warning: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT.
Clean: General cleaning the unit will greatly prolong the treadmill.
Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of
the walking belt and also the side rails. This reduces the build up of foreign material underneath the
walking belt by wearing the clean running shoes.
Warning: Always unplug the treadmill from the electrical outlet before removing the motor cover. At least
once a year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We
recommend
a periodic inspection of the deck. You need contact with our service center if you find the damage of the
deck.
We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) annually
Medium user (3-5 hours/ week) every six months
Heavy user (more than 5 hours/ week) every three months
We recommend that you buy the lubrication from our distributor or directly to our company.
Attention: Any repair need the professional technician.
1, We suggest that you should switch off the power for 10 minutes after keep running 2hours, so that it's
good for maintain the treadmill.
2,For avoiding the slipping during running , the belt should be not too loose; for avoiding the more
abrasion between the roller and belt and maintain the machine's good running ,the belt should be not too
tight. You can adjust the distance between deck and belt , the belt should be away from the deck about
50-75mm on both sides,if the best not too tight and loose.
17