schmersal SLC 410 B Instructions De Montage Et De Raccordement page 56

CONFIGURATION OF THE TYPE OF BLANKING
The Type of Blanking of the SLC 410 B / BM light curtain is set with suitable connections on
the M12 8-pin connector of the Receiver (Table 9).
SEL_A (pin 5)
connected to:
0VDC
SEL_A (pin 5)
connected to:
0VDC
SEL_A (pin 5)
connected to:
24VDC
SEL_A (pin 5)
connected to:
24VDC
SEL_A (pin 5)
connected to:
OSSD1 (pin 1)
SEL_A (pin 5)
connected to:
OSSD2 (pin 3)
It is not possible to modify the configuration of the type of Blanking with the light
curtain operating. The system must first of all be switched off and then on again.
18
CONNECTIONS
SEL_B (pin 6)
connected to:
0VDC
SEL_B (pin 6)
connected to:
24VDC
SEL_B (pin 6)
connected to:
0VDC
SEL_B (pin 6)
connected to:
24VDC
SEL_B (pin 6)
connected to:
OSSD2 (pin 3)
SEL_B (pin 6)
connected to:
OSSD1 (pin 1)
Table 9
SEL_C (pin 4)
connected to:
0VDC
SEL_C (pin 4)
connected to:
Presence Obligation – Mode
24VDC
SEL_C (pin 4)
connected to:
Presence Obligation - Mode
24VDC
SEL_C (pin 4)
connected to:
Presence Obligation - Mode
0VDC
SEL_C (pin 4)
connected to:
Presence Obligation - Mode
24VDC
SEL_C (pin 4)
connected to:
Presence Obligation - Mode
0VDC
FUNCTIONING MODE
No blanking
Blanking Without Object
A1
Blanking Without Object
A2
Blanking Without Object
A3
Blanking With Object
B1
Blanking With Object
B2