Placing And Unpacking - Vestfrost VLS 024 SDD Consignes D'utilisation

Placing and unpacking

Unpacking
Unpack the appliance and check that it
has not been damaged. If you observe any
damage, please inform your supervisor.
Placing
Install the appliance in a dry and well ven-
tilated place. Avoid installation near heat
sources or in direct sunlight.
Place the appliance on the floor and make
sure that it is level.
Adjustable feet
Level the appliance by screwing the adjust-
able feet up or down.
If the appliance is to be placed on a soft
surface, e.g. floorboards or a carpet, it is
best to recheck whether the appliance is
still level after a period of time as the under-
lying surface may give under the weight of
the appliance.
Room temperature
The appliance is designed and adjusted to
produce an optimum temperature level in
the vaccine compartment at a minimum/
maximum ambient temperature of +5°C to
+43°C.
The Climate Class is indicated on the
rating plate.
Climate class:
0, 1, 2, 3, 4, 6 ,8 =ambient 32°C
Climate class
5 and 7
NOTE: There must be free access to the
ventilation grille. (On the backside.)
Important:
Do not use open fire or cigarettes in the
proximity of the appliance.
Ventilation
fig. 4
It is important that the appliance is placed-
well ventilated, so that air can circulate
unhindered above, below, and around the
appliance. Fig. 5 illustrates how the neces-
sary air circulation can be ensured. There
must be at least 30 mm clearance between
the base of the appliance and the floor.
Ventilation openings in the appliance or in
built-in structures must be kept clear.
7
= ambient 43°C
GB
fig. 5