Control Panel; Solar Panels - Vestfrost VLS 024 SDD Consignes D'utilisation

GB

Control panel

ON/OFF Switch
(circuit breaker)

Solar panels

Placing
Solar panels are always to be placed on a
stable roof or bar, which is safe and easily
accessible (not for the public).
The solar panels are always to be fitted
according to the supplier's instructions and
with the screws and fittings included or
recommended by the manufacturer.
Do not place the solar panels in the
shadows of buildings, trees, etc. The
surfaces of the solar panels are to be
turned directly towards the sun.
Specifications
The specifications which the solar panels
are to observed are available in table 2.
The green diode indicates that the compressor is running.
Type :
Nominal voltage:
Nominal power:
Number of parallel
connected modules
per array:
Warranty:
Performance guar-
antee:
Certificates:
Table 2
10
Solar-thermometer
Green diode
fig. 9
Type 2 according E003/
PV01 direct drive
18V
360W (standard test
conditions)
4
Min. 2 years
25 years (to 80% of
original value)
UL, TÜV or compliance
with the requirements of
IEC 61215