ABB TZIDC Note De Mise En Exploitation page 39

Optionally the following modules are allowed to be used:
Plug-In module for digital
feedback
(Terminals +51 / -52 resp.
+41 / -42)
Plug-In module for analogue
feedback
(Terminals +31 / -32)
Plug-In module for
shutdown-function
(Terminals +51 / -52 resp.
+85 / -86)
Special conditions
The local communication interface (LKS) may only be operated at Um ≤ 30 V DC outside
the potentially explosive area.
Electrical data for type TZIDC with marking Ex nA IIC T6 resp. T4 Gc
Signal circuit
(Terminals +11 / -12)
Switch input
(Terminals +81 / -82)
Switch output
(Terminals +83 / -84)
Optionally the following modules are allowed to be used with type TZIDC
Plug-In module for digital
feedback
(Terminals +51 / -52 resp.
+41 / -42)
Plug-In module for analogue
feedback
(Terminals +31 / -32)
Additionally the following modules are allowed to be used with all types marked
Ex nA IIC T6
Plug-In module for
shutdown-function
(Terminals +51 / -52 resp.
+85, -86)
Mechanical digital feedback
(Terminals Limit1 +51 / -52
resp. Limit2 +41 / -42)
CI/TZIDC/110/120-FR
Caractéristiques techniques Ex importantes
In type of protection "Intrinsic Safety" (Ex ia IIC resp. Ex ib IIC)
only for the connection to a certified intrinsically safe circuit with
the following maximum values:
U = 30 V
i
l = 320 mA
i
P = 500 mW
i
effective internal capacitance: C
The effective internal inductance is negligibly small.
U = 30 V
i
l = 320 mA
i
P = 1.1 W
i
effective internal capacitance: C
The effective internal inductance is negligibly small.
U = 30 V
i
l = 320 mA
i
P = 1.1 W
i
effective internal capacitance: C
The effective internal inductance is negligibly small.
U = 9.7 VDC; 4 ... 20 mA, max. 21.5 mA
U = 12 ... 24 VDC; 4 mA
U = 11 VDC
U = 5 ... 11 VDC
U = 10 ... 30 VDC; 4 ... 20 mA, max. 21.5 mA
U = 20 ... 30 VDC
U = 5 ... 11 VDC
TZIDC, TZIDC-110, TZIDC-120
= 3.7 nF
i
= 6.6 nF
i
= 3.7 nF
i
39