Transmitting A Status Message - Kenwood TK-2180 Mode D'emploi

T
RANSMITTING A
Status messages can contain up to 16 alphanumeric
characters. To transmit a Status message:
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status Mode
or Selcall + Status to enter Selcall Mode.
• When using the Status key to enter Status Mode, the station
ID is fixed and cannot be selected. Skip to step 5 to continue.
3 In Selcall Mode, rotate the selector or press the <B and C>
keys to select the ID of the station you want to call.
• Alternatively, you can enter a station ID using the DTMF
keypad.
• If Manual Input Mode is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector. To
enter Manual Input Mode, press and hold the S key. When
using the selector, rotate it to select a digit. The cursor can be
shifted to the left or right by pressing the <B or C> key. Repeat
this process until the entire ID is entered.
4 Press the S key to enter Status Mode.
5 Rotate the selector or press the <B and C> keys to select
the status ID you want to transmit.
• Alternatively, you can enter the status ID using the DTMF
keypad.
• If manual input mode is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector. To
enter manual input mode, press and hold the S key. When
using the selector, rotate it to select a digit. The cursor can be
shifted to the left or right by pressing the <B or C> key. Repeat
this process until the entire ID is entered.
6 Press the Call 1 to Call 6 key to initiate the Status call.
S M
TATUS ESSAGE
23