Installation Check List - Manitowoc RF Serie Mode D'emploi

Masquer les pouces Voir aussi pour RF Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions

Installation Check List

All Manitowoc ice machines are factory-operated and adjusted before shipment. Adjustments and maintenance
procedures outlined in this manual are the responsibility of the owner/operator and are not covered by the warranty.
Is the Ice Machine level?
Is the ice machine and adapter (when used)
secured to the dispenser?
Have all of the electrical and water
connections been made?
Has the supply voltage been tested and
checked against the rating on the nameplate?
Is there proper clearance around the ice
machine for air circulation?
Is the ice machine grounded and polarity
correct?
Has the ice machine been installed where
ambient temperatures will remain in the range
of 50° - 100°F (14.4° - 37.8°C)?
Has the ice machine been installed where the
incoming water temperature will remain in the
range of 50° - 90°F (14.4° - 32.2°C)?
18
Is there a separate drain for the water-cooled
condenser?
'
Is there a separate drain for the dispenser?
Is the ice making water turned on?
Are all electrical leads free from contact with
refrigeration lines and moving equipment?
Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?
Has the owner/operator completed the
warranty registration card?
Has the ice machine and bin been sanitized?
Is the rocker switch set to ON?
Section 2
Part Number 000007644 8/14

Publicité

Chapitres

Table des Matières
loading

Table des Matières