Other Safety Notes - Cotek SR-1600 PLUS Manuel

Onduleurs pur sinus
Masquer les pouces Voir aussi pour SR-1600 PLUS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Warning!
battery, output, signal, please do not change or rework the
terminal wiring unless you are a qualified engineer

1-2. Other Safety Notes

 Upon receipt, examine the carton box for damage. Notify the carrier
immediately, before opening, if damage is evident.
 Do not operate near water or in excessive humidity.
 The DC side connections should be firm and tight.
 Grounding:Reliable grounding should be maintained.
 Do not drop a metal tool on the battery. The resulting spark or
short-circuit on the battery or on the other electrical part may cause
an explosion.
 Install the inverter in a well-ventilated area. Do not block the front air
vents, or the rear air exhausts of the unit.
 Wiring:Adequate input power must be supplied to the inverter for
proper use; correct wiring sizes must be ensured.
 Mount the inverter such that the fan axis is horizontal.
 Do not operate the inverter close to combustible gas or open fire.
 Do not operate appliances that may feed power back into the
inverter.
 Temperature:The inverter should be operated in an ambient
temperature range of -25℃ to 40 ℃ otherwise the output efficiency
may be affected. Air flow to the inverter must not be blocked.
2
For the terminals on the backplane including AC,

Publicité

Chapitres

Table des Matières
loading

Table des Matières