Kemper Dusty Evo Notice D'utilisation page 63

6.2.1 Automatic start/stop (optional)
Pos. Description
11 Start/stop module
connection socket
The connection socket for the optionally available start/stop module
(Pos. 11) is located on the back of the product.
As soon as the start/stop module is connected to the connection socket
(Pos. 11), the start/stop mode is activated.
When the start/stop module is activated by a welding process, the product
starts. After the welding process is finished, the product switches off again
after a set run-on time.
6.3 Commissioning
WARNING
Danger due to faulty product condition.
The product must be fully installed before commissioning begins. All
doors must be closed and the necessary connections must have been
made.
1502937-00
Fig. 19: Automatic start/stop
Pos.
12
Tab. 17: Automatic start/stop
- 63 -
Description
Connection cable
EN