Kemper Dusty Evo Notice D'utilisation page 59

5.1 Mounting the rear wheels
Pos. Description
1 Rear wheel (2x)
2 Steel sleeve (2 x)
Mount the rear wheels on both sides as follows:
1. As shown in the illustration, fix the rear wheel (Pos. 1) to the product
with the hex bolt + washer (Pos. 3) and metal sleeve (Pos. 2) using a
suitable tool. For permanent fixing, apply a drop of screw locking
adhesive to the thread of the screw.
2. Then, fit the wheel cover on the rear wheel.
1502937-00
Fig. 16: Mounting the rear wheels
Pos. Description
3
4
Tab. 14: Mounting the rear wheel
- 59 -
Hex bolts + U washer (2 x)
Wheel cover (2 x)
EN