Télécharger Imprimer la page

WAGNER WOOD&METAL EXTRA GRAVITY FEED Manuel page 11

Façade amovible

Publicité

Les langues disponibles

Les langues disponibles

Gravity spray attachment
4) Close the container again.
5) Spray the water or solvent into a container or a cloth.
6) Repeat the above procedure until the water or solvent emerging from the nozzle is clear.
7) Turn off the machine and remove the plug.
CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun
with metal objects. The ventilation hose and diaphragm are only solvent-resistant
to a limited extent. Do not immerse in solvent, only wipe.
8) If the valve is soiled with paint, it must be cleaned. To do this, unplug the hose, split
it and remove the diaphragm. Carefully clean all parts or replace if necessary. (Fig. 8)
The unit may only be operated with an integer diaphragm. When assembling,
i
insert the diaphragm with the pin pointing downwards.
9) Unscrew the union nut and remove the air cap and nozzle. Clean the air cap, nozzle
seal and nozzle with a brush and solvent or water.
10) Push the nozzle seal (Fig. 9, 4) over the needle (14); the groove (slot) should point
towards you.
11) Put the nozzle (Fig. 9, 3) onto the gun body and find the correct position by turning it.
12) Put the air cap (Fig. 10, 2) onto the nozzle (3) and tighten it using the union nut (1).
Pos. Designation
1
Union nut
2
Air cap
Australia (AUS) version order no. in brackets
3
Nozzle
4
Seal
6
Container 600 ml with cover
7
Valve complete with hose
8
Container 150 ml with cover
9
O-ring
The CLICK&PAINT SYSTEM with additional spray attachments and accessories
offers the right tool for each work.
Further information about the WAGNER range of products for renovating is
available under www.wagner-group.com
Environmental protection
The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.
Spare Parts List (Fig. 1)
GB
Order No.
2410212
2362877
AUS (2361747)
2361238
0417706
2410208
2410217
2410210
2362875
7

Publicité

loading