Publicité
Les langues disponibles
Les langues disponibles
Original Instruction Manual
En
The carbon brushes should be changed regularly. In order not to damage the electrical
circuit, both carbon brushes should be changed at the same time.
CAUTION!
For this item, exchanging the carbon brushes should be done by authorized service
only.
The machine should be used only with both brushes!
STORING
Store the machine, operating instructions and where necessary the accessories in the
original packaging. In this way you will always have all the information and parts ready
to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.
Instruction for abrasive wheels and discs
Stack and support wheels carefully on trucks so that they will not topple over and be
damaged. Do not pile heavy castings or tools on top of abrasive wheels.
Suitable racks, bins or compartmented drawers should be provided to accommodate
the various types of wheels used. Most plain and tapered wheels are best supported
on their edges or on a central support.
To minimise deterioration, wheels must be stored in a room which is dry and not
subject to extreme temperatures. It is recommended that wheels should be marked
with the date they are received from the supplier. Older wheels should be issued before
newer wheels and if there is any doubt, or if wheels have been in stock for more than
three years, the manufacturer should be consulted about their suitability for use.
12
10/2016
Publicité
