GO/ON S1M-KM19-230-1 Mode D'emploi page 64

Original Instruction Manual
d) Use special care when working corners, sharp edges etc. Avoid bouncing
and snagging the accessory. Corners, sharp edges or bouncing have a
tendency to snag the rotating accessory and cause loss of control or kickback.
e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such
blades create frequent kickback and loss of control.
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
INTENDED USE
The machine is intended for grinding metal and stone materials without using water.
TECHNICAL SPECIFICATIONS
Model:
Voltage:
Power consumption:
Rated speed:
Drive spindle diameter:
Max. grinding disc size:
Sound pressure level L
Sound power level L
vibration level for surface grinding
Ambient condition limits
NOISE/VIBRATION INFORMATION
Measured sound values determined according to EN 60745.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745:
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly
7
S1M-KM19-230-1
230-240 V ~ 50 Hz
2200 W
6500 minˉ¹
M14
230mm x 6mm
91dB(A) k = 3 dB(A)
pA
102dB(A) k = 3 dB(A)
WA
a
From 10° to 40°C
= 4,56 m/s² k = 1,5 m/s²
h,AG
En
10/2016