GO/ON S1M-KM19-230-1 Mode D'emploi page 66

Original Instruction Manual
2. Turn the guard to the desired position.
3. Retighten the hexagon bolt firmly.
WARNING
The closed disc guard should always point towards the user to protect him from sparks
and chippings.
Auxiliary handle
CAUTION! The machine should be used only with both handles.
Depending on the working method, the auxiliary handle can be mounted in two
different positions on the grinding head.
Do not continue to use an auxiliary handle if it is damaged.
Disc selection
Do not use accessories which are not specifically designed!
Please always double check the disc which will be assembly.
Mounting disc
Depending on the working conditional, always select a suitable type and thickness of
the disc.
The mounting hole of disc must fit with the mounting flange. Do not use reducers or
adapters.
The direction-of-rotation arrow on disc and machine (see direction-of-rotation arrow on
the machine head) should be same.
CAUTION!
Never use discs whose diameter is larger than that indicated.
The maximum rotation speed of disc must be greater than the idling speed of the
machine.
.
To assembly the disc, press the spindle-lock button in deep and hold
it in this position continuously. If necessary, turn the spindle slightly
with the free hand until it locks into position.
And then put the disc between two parts of flange and then tighten it
with the spanner provided.
9
En
10/2016