GE GBF 180 Serie Manuel Du Propriétaire page 9

Masquer les pouces Voir aussi pour GBF 180 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Getting started
CONTROL PANEL - Model GBT412/632 Series
1
Power Button
Switch on / off the power by pushing.
Cycles Button
To select the program by pushing.
Options Button
To select a function after setting a program.
Delay Start Button
To set the delay start time, showing in the display
window as H01- H24.
Start/Cancel Button
Select or pause the washing program when the machine
is working.
Wash Cycle selections
Rinse Aid. When the indication light is on, add rinse
agent such as Finish
Jet-Dry
®
agent dispenser. See Dispensers section.
NOTE: The use of rinse aid can further enhance the
dishwasher's drying performance.
Sanitized. Displayed at end of the cycle when the
Sanitize option has been selected and dishwasher has
met requirements for sanitization.
Clean. Displayed when a wash cycle is complete. The
light stays ON as a reminder that the dishes are clean.
Display - Wash Cycle selections
Auto. Auto sensing wash, lightly, or heavily soiled
crockery, with or with out dried-on food
29-6273
6
2
8
Rinse Aid to the rinse
®
3
4
Heavy. This cycle is for hard-to-clean, heavily soiled
dishes, pots, pans, and dishes.
Normal. For regularly soiled dinner dishes or silverware.
ECO. This is a standard program, suitable to clean
normally soiled tableware and is the most efficient
program in terms of combined energy and water
consumption for that type of tableware.
China/Crystal. For lightly soiled loads, such as glasses,
crystal and fine china.
90 mins. Lightly soiled plates and pans that need a
quick wash.
Speed. Shorter wash for lightly soiled loads that do not
need drying.
Rinse. Use for rinsing dishes glasses and silverware that
will not be wash right away.
Options
Heated Dry. When the Heated Dry function is selected,
the heater will work during the drying process.
Sanitize. When the"Sanitize"function is selected,
the temperature of water will be maintained at 69°C
(156.2°F) max. The max. temperature may not be
reached if the incoming water temperature is not correct.
Certified residential dishwashers are not intended for
licensed food establishments.
WARNING: The sanitize option is available with
Nomal, Heavy and Energy cycles.
Hi Temp. When the Hi Temp function is selected, the
temperature of the water will be maintained at 60°C
(140°F) max.
7
5
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières