Selecting The Correct Cuff Size; Attaching The Cuff To The Monitor - A&D Medical LifeSource UA-789AC Guide D'instructions

Selecting the Correct Cuff Size

Using the correct cuff size is important for an accurate reading. A cuff
that is too large will produce a reading that is lower than the correct blood
pressure; a cuff that is too small will produce a reading that is higher
than the correct blood pressure. With your arm hanging at the side of
your body, measure the circumference of your upper arm at the midpoint
between the shoulder and elbow.
Arm size
16.5" - 23.6" (42-60 cm)
14.2" - 17.7" (36-45 cm)
9.4" - 14.2" (24-36 cm)
The AccuFit Extra Large Cuff is designed to accommodate larger arm
™
sizes measuring from 16.5" - 23.6" (45-60 cm). This cuff is contoured to
provide you with a quick and comfortable fit. To place the cuff on properly,
please read the section "Taking Your Blood Pressure" (see pg. E-8).

Attaching the Cuff to the Monitor

After installing the batteries, you must attach the blood pressure cuff to the
monitor. To do so, insert the Air Connector Plug of the blood pressure cuff
into the Air Socket of the monitor firmly.
NOTE: Be sure to differentiate the Air Socket from the AC Adapter Jack. The Air Connector Plug will
only securely fit into the correct jack.
Recommended
Cuff size
Extra Large Cuff
Large Cuff
Medium Cuff
Replacement
cuff model #
Included in unit
UA-281
UA-280
E-5