Publicité
Les langues disponibles
Les langues disponibles
8630972
5.
Use protective gloves that will reduce vibration and protect
your hands in case of unexpected situations.
6.
Do not place hands over air vents. Proper cooling of the
motor is necessary to ensure normal life of the tool.
7.
Never point the tool towards yourself. If it should slip, part
of your body could come in contact with moving parts.
8.
Never force the tool. Excessive pressure could bend or
break the mandrel, resulting in damage to the tool, your
work piece or serious personal injury. If your tool runs
smoothly under no load, but does not run smoothly under
load, then excessive pressure is being used.
9.
This tool will not stop moving immediately. Do not lay the
tool down or leave it unattended until it has come to a
complete stop. A part that is moving could make the tool
jump or grab a surface and pull the tool out of your control.
10. Use an appropriate dust respirator when working for an
extended period of time. This will help prevent breathing in
the fine dust created while working.
WARNING! Dust that is created by power sanding, sawing,
grinding, drilling, and other construction activities may
contain chemicals that are known to cause cancer, birth
defects, or other genetic abnormalities. The level of risk from
exposure to these chemicals varies, according to how often
this type of work is performed. In order to reduce exposure to
these chemicals, work in a well-ventilated area, and use
approved safety equipment, such as a dust mask that is
specifically designed to filter out microscopic particles.
11. Always check accessory bits for damage before each use.
Damaged accessories can break during use and cause
serious injury.
12. Never touch the socket during or immediately after use.
After use, the socket will be too hot to be touched by
bare hands.
6
1/2 in. dr. Micro Stubby Air Impact Wrench
For technical questions call 1-800-665-8685
V1.0
Publicité
