Publicité
Les langues disponibles
Les langues disponibles
8630972
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and
side protection for the eyes. Wear a full-face shield if your
work creates metal filings or wood chips.
a.
Eye protection equipment should comply with ANSI
Z87.1 standards.
2.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.
Non-skid footwear is recommended to maintain footing
and balance in the work environment.
4. Steel toe footwear or steel toe caps to prevent injury from
falling objects.
5.
Wear protective clothing designed for the work
environment and tool.
6.
Wear a NIOSH approved respirator when working on
materials that produce dust or particulate matter.
7.
This tool can cause hearing damage. Wear hearing
protection gear with an appropriate Noise Reduction
Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
4
1/2 in. dr. Micro Stubby Air Impact Wrench
For technical questions call 1-800-665-8685
V1.0
Publicité
