Publicité
Les langues disponibles
Les langues disponibles
8630972
6.
Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
LUBRICATION
Only use air tool oil to lubricate the tool. Other lubricants
may not be suitable and could damage the tool or cause a
malfunction during use.
1.
It is very important that the tool be properly lubricated.
Without proper lubrication, the tool will not work properly
and parts will wear prematurely. Manually dropping a drop
or two of air tool oil once a day into the tool's male
connector is better than using an automatic in-line
lubricator, which should only be required when there are
multiple users of the same tool.
2.
Keep the air line lubricator filled and correctly adjusted.
The in-line lubricator should be regularly checked and filled
with air tool oil. Proper adjustment of the in-line lubricator
is performed by placing a sheet of paper next to the
exhaust ports and holding the throttle open approximately
30 seconds. The lubricator is properly set when a light stain
of oil collects on the paper. Excessive amounts of oil should
be avoided.
3.
Air tool oil is the only recommended lubricant for use in all
air tools. Do not try to use other types of lubricants to oil
your tools. Using the wrong lubricant will cause premature
tool failure and / or loss of power. Use only recommended
lubricants, specially made for pneumatic applications.
Substitutes may harm the rubber compounds in the tool's
O-rings and other rubber parts.
12
1/2 in. dr. Micro Stubby Air Impact Wrench
For technical questions call 1-800-665-8685
V1.0
Publicité
