Gewiss Chorus GW 10 741 Mode D'emploi page 26

PROGRAMMING WITH THE EASY CONFIGURATOR
Name of the functions
toggle
edges
timer mode
scene
dimming toggle
dimming
blinds toggle
blind control
For more details about the programming procedures please refer to the Easy controller
documentation.
cyclic ON/OFF switchover command
fronts management command
ON command with timer
(the time is set on the actuator)
scene management command
dimmer management command with 1 channel
dimmer management command with 2 channels
roller blind or Venetian blind management command
with 1 channel
roller blind or Venetian blind management command
with 2 channels
26