Special Features - GE Appliances JKS3000 Manuel De L'utilisateur

Special Features

There are several different special features on your wall oven. To change
the settings of these special features, press the Bake and Broil pads at the
same time and hold for three seconds. "
will appear in the display. For each of the features below, select and edit the
feature you want to change by using the 8 and 2 pads to scroll up and down,
the 6 pad to edit (or Save and exit), and the 4 pad to return to the prior menu
without saving.
Adjust the Oven Temperature (
This feature allows the oven baking temperature to be
adjusted up to 35ºF hotter of down to 35ºF cooler. Use
this feature if you believe your oven temperature is too
hot or too cold and wish to change it. For double oven
models, the upper and lower ovens are adjusted
separately. Do not use thermometers, such as those
found in grocery stores, to check the temperature setting
of your oven. These thermometers may vary 20–40
degrees. Navigate to "
" " for the upper oven or "
oven. Press 6 to edit the offset. "0" or a number between
+ and - 35 will be displayed. Press 2 to increase, 8 to
decrease. -35 to +35 is the available offset range. Press
6 to save and exit. Press 4 to exit without saving.
Sound Volume (
This feature allows the oven tone volume to be adjusted.
" and press 6 to view or change the
Navigate to "
current setting. Scrolling through allows you to hear each
volume level.
End of Timer Signals (
This is the tone that signals the end of a timer. The
tone can be continuous "
beep " ". A continuous setting will continue to
sound a tone until a button on the control is pressed.
Navigate to "
the current setting.
8
" for single ovens,
" for the lower
)
)
" or one repeating
" and press 6 to view or change
" (" " on double ovens)
) Fahrenheit or Celsius Temperature
Display (
The oven control is set to use Fahrenheit temperatures
(F), but you can change it to use Celsius temperatures
(C ). Navigate to "
change the current setting.
Clock Display (
This feature turns the clock on or off in the display.
Navigate to "
the current setting.
Clock Configuration (
This feature specifies how the time of day will be
displayed or if no time of day will be displayed. You can
select a standard 12-hour clock (
time display (
view or change the current setting.
12-Hour Shutoff (
When this feature is turned on, the oven will
automatically turn off after 12 continuous hours of use.
Navigate to "
current setting.
1 2 3
=
4 5 6
7 8 9
Set
Cook
0
Clock
Time
AM/PM
)
" and press 6 to view or
)
" and press 6 to view or change
) or 24-hour military
). Navigate to "
)
" and press 6 to view or change the
1 3
Cancel 5 Edit, Save
Exit & Exit
7 9
Set
Cook
0
Clock
Time
AM/PM
)
" and press 6 to
49-2000253 Rev. 1