audisse shirudo Mode D'emploi page 18

Rotate the Tuning/Seek/Select control to highlight 'Enable' and press the control. The
display will show the Frequency options for the alarm. The alarm frequency options
are as follows: 'Off' - the alarm will be disabled 'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once 'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only. Rotate the Tuning/Seek/Select
control to choose the required alarm frequency option. Choosing Off will disable the
alarm. Press the control to confirm the selection. If you choose to set the alarm to Once
you will also need to set the date using the Tuning/Seek/Select control.
The alarm can be set to buzzer, Internet radio, DAB radio or FM radio. For whichever
radio mode is selected, the radio alarm may be set to any of the stations, which have
been stored as presets or to the station most recently listened to. Rotate the Tuning/
Seek/Select control to highlight the current 'Mode' option for the alarm, then press the
control if you wish to change it. Rotate the Tuning/Seek/Select control to highlight
either 'Buzzer' or the required radio mode. Press the control to confirm the selection.
If setting the alarm to a radio option, rotate the Tuning/Seek/Select control to highlight
the 'Preset:' option then press the control if you wish to change it. Choose from either
the radio station 'Last listened' to, or from the presets 1 - 40. Scroll to the chosen option
and press the control to confirm the selection. Note that you can only set the alarm to
use a preset which has already been stored.
33
Rotate the Tuning/Seek/Select control until the 'Volume:' option is highlighted on
the display and press the control if you wish to change it. The sound system uses
the saved volume setting for each alarm when it sounds. Rotate the control to set the
required volume and then press the control to confirm the setting.
In order to store the alarm settings rotate the Tuning/Seek/Select control until 'Save'
is highlighted. Press the control to store the alarm settings. Your radio will show 'Alarm
saved' and will then go back to the list of alarms with the new alarm setting shown in
the display. If you decide not to save the settings, press the Back button. The display
will show 'Save changes' with a 'YES' or 'NO' option. Rotate the Tuning/Seek/Select
control to choose 'NO' and then press the control. 'Alarm not saved' will show on
the display. Active alarms are shown using small alarm indicators at the bottom of the
playing displays and on the clock display when in standby.
GB
34