Publicité
Les langues disponibles
Les langues disponibles
BLUETOOTH
The Bluetooth mode on your sound system allows you to play audio, play sound from
video files and stream music from Bluetooth capable devices such as your mobile
phone, computer, tablet etc. through your Audisse Shirudo's loudspeakers.
Connecting Bluetooth devices
The sound system allows to be connected to one Bluetooth device via Bluetooth
connection.
Ensure that the Bluetooth capability on your phone, tablet or PC is enabled. You may
need to refer to the user documentation for your device, since the method will vary with
each device.
Press the Power button to switch on the Audisse Shirudo sound system.
Press the Source button on your sound system until the Bluetooth is selected.
Press the Menu button to enter Bluetooth menu;
Press the Tuning/Seek/Select control to select "Discoverable" and press the control
to start enter Bluetooth discovery mode.
The Audisse Shirudo sound system will immediately enter discovery mode by flashing
its Bluetooth icon, and showing "Bluetooth Discoverable", "Please connect with a device
to: Audisse Shirudo" on the display.
27
Using the Bluetooth settings of your phone, tablet or PC direct it to search for
'discoverable' devices. After a few seconds, you should see a device named 'Audisse
Shirudo'. Just occasionally it may take longer for the sound system to be found by your
device.
Select 'Audisse Shirudo' to cause your phone, tablet or PC to pair with your sound
system and to establish a connection.
Once the connection is established, the Bluetooth icon on the LCD will stop flashing and
will remain on. A message will be displayed briefly confirming and followed by a display
with the name of the connected device.
You can now begin playing music from your smart-phone, tablet, etc.
Some Bluetooth devices may require a 'Passkey' (an authentication key) in order to
establish a link between devices. A passkey is similar to a password, although you only
need to use the passkey once to establish a link. If your device asks for a passkey to be
able to pair with your radio then enter a code of 0000 (four zeroes).
GB
28
Publicité
