Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna DM650 Manuel D'utilisation

Symbols on the mac hine
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the heading
"Personal protective equipment".
En vironmental marking. Symbols on
the product or its packaging indicate
that this product cannot be handled as
domestic waste. It must instead be
submitted to an appropriate recycling
station for the recovery of electrical and
electronic equipment.
By ensuring that this product is taken
care of correctly, you can help to
counteract the potential negative impact on the
environment and people that can otherwise result through
the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
2 – English
KEY T O SYMBOLS
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
CAUTION!
NOTICE!
NO TICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
W ARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CA UTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.