BIG MIKE 120V Mode D'emploi page 8

5.0 Setting up the BIG MIKE for use
Never place your hands or any other part of your body over the end of the
suction hose or inlet spigot while the BIG MIKE is in operation.
Always use the BIG MIKE with the Primary Filters or Overfill Protection
Filter in place. Using the BIG MIKE without the Primary Filters or Overfill
Protection Filter in place can cause damage to the motors. See the
section "Filters" for more information.
The BIG MIKE Leapfrog Wet & Dry consists of:
1. Leapfrog Body
2. 2 x Primary Filters (for dry use only)
3. Overfill Protection Filter (for wet use only)
4. Lid
5. Wet & Dry Power Unit
6. Suction Hose with Tool
5.1 The Collection Drum
The BIG MIKE Leapfrog Wet & Dry fills your own drums and vessels.
Before using the BIG MIKE Leapfrog Wet & Dry, ensure that the top rim of your collection drum is in
good order and free from dents or damage.
8
Caution