BIG MIKE 120V Mode D'emploi page 13

Place the Leapfrog Body squarely onto your collection drum.
Place the Leapfrog Body onto your collection drum
Look inside the Leapfrog Body. Ensure that the lift-and-turn catches are turned away from the hole
inside the Body to allow the Overfill Protection Filter to be inserted freely.
Insert the Overfill Protection Filter into the centre of the Body. Secure the Overfill Protection Filter in
place by turning the three catches.
Place the Lid inside the Body. Place the Power Unit on top of the Lid.
Place the Lid inside the Body Place the Power Unit on the Lid
Attach the suction pipe to the spigot on the front of the Leapfrog Body. The BIG MIKE Leapfrog Wet &
Dry is now ready for use in wet mode.
13