Publicité
Les langues disponibles
Les langues disponibles
7 Troubleshooting
Drying operation takes too long.
Fibre filter (interior and exterior filter) pores may
be clogged. >>> Wash the fibre filters with warm
water and dry.
Evaporator front side may be clogged. >>> Clean
the front side of the evaporator.
The ventilation grills in front of the machine may
be closed. >>> Remove any object in front of the
ventilation grills that blocks air.
Ventilation may be inadequate because the are the
machine is installed in is too small. >>> Open the
door or windows to prevent the room temperature
from rising very high.
A lime layer may have accumulated on the
humidity sensor. >>> Clean the humidity sensor.
Excessive amount of laundry might be loaded.
>>> Do not load the drying machine excessively.
Laundry might not have been wrung adequately.
>>> Perform a higher speed wringing on the
washing machine.
Clothes come out damp after drying.
A program not suitable for the laundry type may
have been used.>>> Check the maintenance
labels on the clothes and select a program
suitable for the clothes' type or use time programs
as extra.
Fibre filter (interior and exterior filter) pores may be
clogged. >>> Wash the filters with warm water
and dry.
Evaporator front side may be clogged. >>> Clean
the front side of the evaporator.
Excessive amount of laundry might be loaded.
>>> Do not load the drying machine excessively.
Laundry might not have been wrung adequately.
>>> Perform a higher speed wringing on the
washing machine.
Drying machine does not turn on or program
cannot be started. Drying machine does not run
after it is configured.
Power plug might be unplugged. >>> Make sure
the power cord is plugged in.
Loading door might be open. >>> Ensure that the
loading door is properly closed.
A program might not be set or Start / Pause /
Cancel button might not be pressed. >>> Check
that the program is set and it is not in Pause
position..
Child lock may be activated. >>> Turn off the child
lock.
Program terminated prematurely for no reason.
Loading door might be closed completely. >>>
Ensure that the loading door is properly closed.
There might be a power outage. >>> Press the
Start / Pause / Cancel button to start the program.
Water tank may be full. >>> Empty the water tank.
Dryer / User Manual
Clothes have shrunk, hardened or spoiled.
A program not suitable with the laundry type might
have been used. >>> Check the maintenance
labels on the clothes and select a program
suitable for the clothes.
Water drips from the loading door.
Fibres might have gathered on the inner sides of
the loading door and the loading door gasket. >>>
Clean the inner surfaces of the loading door and
the loading door gasket surfaces.
Loading door opens by itself.
Loading door might be closed completely. >>>
Push the loading door until the closing sound is
heard.
Water tank warning symbol is on/flashing.
Water tank may be full. >>> Empty the water tank.
Water discharge hose might have collapsed. >>>
If the product is connected directly to the water
drain check the water discharge hose.
The lighting inside the drying machine does not
turn on. (In models with lamp)
The drying machine might not have been turned
on using On/Off button. >>> Check that the
drying machine is turned on.
Lamp might be malfunctioning. >>> Contact
Authorized Service to replace the lamp.
Anti-crease icon is lit.
Anti-Crease mode that prevents the laundry in the
drier to crease may be activated. >>> Turn the
drier off and remove the laundry.
Fibre filter cleaning icon is lit.
Fibre filter (interior and exterior filter) may be
unclean. >>> Wash the filters with warm water
and dry..
A layer may be formed on the fibre filter pores that
leads to clogging. >>> Wash the filters with warm
water and dry.
An audible warning is heard from the machine
Fibre filters may not be inserted. >>> Insert the
interior and exterior filters to their places.
Filters of the machine may not have been
installed.>>> Install the fibre filters (internal and
external) or the environmentally-friendly filter to
their housing.
Evaporator warning icon is flashing.
Evaporator front side may be clogged with fibres.
>>> Clean the front side of the evaporator.
Fibre filters may not be inserted. >>> Insert the
interior and exterior filters to their places.
21
Publicité
