Publicité
Les langues disponibles
Les langues disponibles
PRODUCT SPECIFICATIONS
Model Number
Warranty
Construction—Pump Housing
Maximum flow rate (with factory supplied hose & nozzle)
Rotor Composition
Motor Horsepower
Amp Draw
RPM
Voltage
Fuse in power cable
Inlet
Outlet
Vane Material
Duty Cycle
Internal Bypass valve
Seal Material (Rotor Cover Seal / Shaft Seal)
Box Contents
Nozzle
Hoses
Poly Suction Tube
Strainer for Inlet
Power Cable
The FR1600 series pump has been tested and complies with the European Community Directive 2006/42/EC, Directive on
Machinery. The following standards were used to verify conformance.
EN 809 "Pumps and pump units for liquids – Common safety requirements"
EN ISO 12100 "Safety of Machinery – Basic concepts, general principles for design"
2014/30/EU "Electromagnetic compatibility"
2011/65/EU "Restrictions of the use of certain hazardous substances in electrical and electronic equipment"
Tuthill Transfer Systems ("Manufacturer") warrants to each consumer buyer of its products (the "Buyer "), from the date of invoice or sales receipt, that
goods of its manufacture ("Goods") will be free from defects of material and workmanship. Duration of this warranty is as follows:
Manufacturer 's sole obligation under the foregoing warranties will be limited to either, at Manufacturers option, replacing or repairing defective Goods
(subject to limitations hereinafter provided) or refund- ing the purchase price for such Goods theretofore paid by the Buyer, and Buyer 's exclusive remedy for
breach of any such warranties will be enforcement of such obligations of Manufacturer. If Manufacturer so requests the return of the Goods, the Goods will
be redelivered to Manufacturer in accordance with Manufacturer 's instructions F.O.B. Factory. The remedies contained herein shall constitute the sole
recourse of the Buyer against Manufacturer for breach of warranty. IN NO EVENT SHALL MANUFACTURER'S LIABILITY ON ANY CLAIM FOR DAMAGES
ARISING OUT OF THE MANUFAC TURE, SALE, DELIVERY, OR USE OF THE GOODS EXCEED THE PURCHASE PRICE OF THE GOODS. The foregoing
warranties will not extend to Goods subjected to misuse, neglect, accident or improper installation or maintenance, or which have been altered or repaired
by anyone other than Manufacturer or its authorized representative. THE FOREGOING WARRANTIES ARE EXCLU- SIVE AND IN LIEU OF ALL OTHER
WARRANTIES OF MERCHANTABILIT Y, FITNESS FOR PURPOSE OF ANY OTHER T YPE, W HETHER EXPRESS OR IMPLIED. No person may vary the
foregoing warranties and remedies except in writing signed by a duly authorized officer of Manufacturer.
Warrantiesorremediesthatdifferfromtheforegoingshallnototherwisebe binding on Manufacturer. The Buyer 's acceptance of delivery of the Goods constitutes
acceptance of the foregoing warranties and remedies, and all conditions and limitations thereof.
Description
PRODUCT WARRANTY
Standard Duty Products – One year
FR1612
12VDC rotary vane
12 VDC rotary vane
pump with hoses,
pump only and
nozzle , strainer,
strainer
clamps, barbed inlet
and outlet adapters.
1 Year
Cast Iron
Up to 10 GPM
Iron
1/5 HP
17Amp
3800
12 VDC
30 Amp
3/4" NPT
3/4" NPT
Acetal
30 Minutes
Yes
NBR / HNBR
No
No
No
Yes
6.5' cable with fuse and
6.5' cable with fuse
battery clips.
4
FR1614
FR1616
12VDC rotary vane
pump with hose,
nozzle, adjustable
poly suction pipe,
strainer, clamps,
barbed outlet adapter.
1 Year
Cast Iron
Cast Iron
Up to 10 GPM
Up to 10 GPM
Iron
1/5 HP
17 Amp
17 Amp
3800
12 VDC
12 VDC
30 Amp
30 Amp
3/4" NPT
3/4" NPT
3/4" NPT
3/4" NPT
Acetal
30 Minutes
30 Minutes
Yes
NBR / HNBR
NBR / HNBR
Yes
Yes
No
Yes (3/4" NPT)
Yes
6.5' cable with fuse and
and battery clips.
battery clips.
1 Year
Iron
1/5 HP
3800
Acetal
Yes
Yes
Yes
Yes
FR1612H1253 Rev3
Publicité
