Publicité
Les langues disponibles
Les langues disponibles
Mechanical
Process Connection
LVS100
• thread
• thread material
LVS200
• thread
• thread material
• flanges
• optional sliding bushing
Tines
• tine material
1
(PTFE
coated tines are available upon special request. Contact your local Siemens
representative for ordering information.)
Enclosure
• construction
• conduit entry
• ingress protection
Weight
• standard version, no extensions
• solids/liquids, no extensions
Environmental
• location
• altitude
• ambient temperature
• relative humidity
• installation category
• pollution degree
1.
Polytetrafluoroethylene
Page EN-6
SITRANS LVS100/200 – INSTRUCTION MANUAL
R 1½" (BSPT); 1¼" NPT (Taper)
ANSI B 1.20.1
stainless steel 316 Ti (1.4581) or
304 (1.4301) for specific configurations
1½" NPT (Taper), R 1½" (BSPT)
stainless steel 304 (1.4301) or
optional stainless steel 316 Ti (1.4571)
DN 100 PN6, DN 100 PN16,
2", 3", 4" ASME 150 lb flanges
with R 2" (BSPT) or NPT (Taper) thread
stainless steel 316Ti (1.4571)
epoxy-coated aluminum
2 x M20x1.5, or 2 x ½" NPT
Type 4X/NEMA 4X/IP66
2.0 kg (4.4 lb)
1.9 kg (4.2 lb)
indoor/outdoor
max. 2000 m (6562 ft)
–40 to +60 °C (–40 to +140 °F)
0 to 100% (suitable for outdoor: ingress
protection: Type 4X/NEMA 4X/IP66)
III
2
7ML19985FT63
Publicité
