Velleman HQ-Power AERON 250 II Notice D'emploi page 6

e. Stand-Alone Mode
In stand-alone mode, your VDP250SC8M2 can be used without controller. The scanner is equipped with
a built-in microphone which allows a sound-controlled operation. Select the "Master mode" to use this
function.
f. Master/Slave Mode
This operation mode allows all slave devices to operate synchronously with the master device. Connect
the DMX out of one device to the DMX in of the next using a cable with XLR jacks. Set the master device
to "No DMX sound" or "No DMX auto". Set the address of all slave devices to 1.
g. DMX Mode
All DMX-controlled devices need a digital start address so that the correct device responds to the signals.
This start address is the channel number from which the device starts to "listen" to the DMX controller.
Enter the correct number and read it from the display located on the base of the VDP250SC8M2.
You can use the same starting address for a whole group of devices or enter an individual one for every
device. When all devices have the same address, all the VDP250SC8M2s will "listen" to the control
signal on one particular channel. In other words: changing the settings of one channel will affect all
devices simultaneously. If you set different addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
In the case of the 8-channel VDP250SC8M2, you will have to set the start address of the first
VDP250SC8M2 to 1, the second VDP250SC8M2 to 9 (1 + 8), the third to 17 (9 + 8) and so on.
h. Detailed DMX Values per Channel
Channel Function
1 Shutter, strobe
2 Colour wheel
Rotating gobo
3
4 Gobo rotation
5
08.01.2010
From
0
129
134
244
250
0
16
32
45
64
80
96
112
128
192
0
16
32
48
64
wheel 80
96
112
128
192
0
16
136
Pan -
VDP250SC8M2
To Description
128 Gradual dimmer adjustment from 0 to 100%
133 No function (shutter open)
243 Random strobe effect with decreasing speed
249 Shutter closed
255 Shutter open
15 White
31 Magenta
47 Yellow
63 Orange
79 Green
95 Red
111 Blue
127 Violet
191 Forwards rainbow effect with increasing speed
255 Backwards rainbow effect with increasing speed
15 Open
31 Gobo 1
47 Gobo 2
63 Gobo 3
9 Gobo 4
95 Gobo 5
111 Gobo 6
127 Gobo 7
191 Forwards gobo change with increasing speed
255 Backwards gobo change with increasing speed
15 No rotation
135 Forwards gobo rotation with increasing speed
255 Backwards gobo rotation with increasing speed
Push slider in order to move the mirror
horizontally. Gradual mirror adjustment from
-
one of slider to the other (0-255, 128-center).
Mirror can be stopped at any position.
6
Rev. 04
©Velleman nv