Velleman HQ-Power AERON 250 II Notice D'emploi page 3

3. General Guidelines
Refer to the Velleman
• This device is designed for professional use on stage, in discos, theatres, etc. The VDP250SC8M2
should only be used indoors and connected to an alternating current of max. 230 VAC~50 Hz.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat (see "Technical
Specifications"), dust and moisture. Respect a minimum distance of 0.5 m between the device's light
output and any illuminated surface.
• Never operate the device where splashing or dripping water, rain, moisture or fog may harm the device.
Install the device 0.5m away from a smoke machine output nozzle.
• Do not operate the device during thunderstorms.
• Ensure sufficient ventilation by leaving 0.5 m of free space between the device and any other object.
• Use an appropriate safety cable to fix the device (e.g. VDLSC7 or VDLSC8).
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the
device.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons. Never remove the barcode.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, crash, etc. Using the device in an unauthorised way will void the warranty.
• The installation has to be approved by an expert before the device is taken into service.
4. Features
• 7 different dichroic colours filters + white
• rainbow effect with adjustable speed in both directions
• gobo wheel with 7 rotating gobos + open
• strobe effect with adjustable speed via shutter
• motorised focus
• 3-facet prism with adjustable speed rotating in both directions
• DMX-controlled, stand-alone or master/slave
• sound control via built-in microphone
• control panel with LCD and encoder
5. Overview
1. ventilation slots
2. fixation screw
3. mounting bracket
4. lens
5. mirror
6. housing
7. housing screw
8. DMX output
9. DMX input
10. power cord connection / fuse holder
11. LCD
12. control LEDs
13. encoder
08.01.2010
®
Service and Quality Warranty on the last pages of this manual.
VDP250SC8M2
3
Rev. 04
©Velleman nv