Publicité
Les langues disponibles
Les langues disponibles
Rackmount Console Switch Owner's Manual
The ID Window
The ID Window appears when you change ports and displays the name of the
selected port. This window can be individually confi gured for each port in your
system. The characteristics of the ID Window can be changed from the Edit Port
Menu. This option is only available if you are operating in non-secure mode or if
you are the system administrator.
Changing the Size, Color and Position of the ID Window
1. Highlight the port you wish to change in the main OSD Window.
2. From the main OSD Window, press the Ctrl key twice to access the Command
3. Select 'Edit Port' from the Command Menu.
4. Choose the option 'ID Setup.'
Follow the procedures outlined in the table below to change the size, color or
position of your ID Window.
22
All manuals and user guides at all-guides.com
Menu or press F3. (If you press F3 skip Step 3)
Operation
Move the ID Window
Change window background color
Change text color
Change window length
Change window size
ID Window Help
Procedure
Use the arrow keys or mouse to move the ID
Window's position on the monitor. (Hold down
the SHIFT key to move faster.) If the window fl ick-
ers but does not move, continue tapping the arrow
keys until it moves back into range.
Press the <PAGE UP> key to cycle through the
available window background colors.
Press the <PAGE DOWN> key to cycle through
the available text colors.
Use the (+) and (-) keys to change the length of
the ID Window.
Press SPACE to toggle between large and small.
Press F1
www.hp.com/racksolutions
Publicité
