HP J1473A Manuel Du Propriétaire page 18

Rackmount Console Switch Owner's Manual
Advanced Install
Attaching Multiple Rackmount Console Switches
1. Follow steps 1-3 of the Basic Install section for each cascaded unit.
2. Plug the 25-pin "D" connector of your input cable into any available server port
3. Plug the 15-pin video connector on the other end of the cable into the port
4. Repeat steps 4-7 in the section 'Connecting Servers to the Rackmount Console
(J1474A MODELS SHOWN)
12
All manuals and user guides at all-guides.com
on the rear of your base Rackmount Console Switch.
labeled on your fi rst cascading switch. Plug the PS/2 mouse connector,
designated by a mouse icon, into the
miniDIN keyboard connector into the
Switch' for each attached server.
PS/2 MOUSE
CONNECTOR
port. Plug the remaining 6-pin
port.
PS/2 KEYBOARD CONNECTOR
www.hp.com/racksolutions
CASCADING
UNIT
BASE UNIT
VIDEO
CONNECTOR